Skip to end of banner
Go to start of banner

How to Set up LDAP

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 6 Next »

The purpose of this article is to provide a step-by-step guide on how to set up LDAP for bitB.

\uD83D\uDCD8 Instructions

  1. Create an AD group for bitB Users

    1. the below group’s set up is not specific, please adjust accordingly to your organization's policies.

      1. Note: You do not have to create a new group, an existing one may be used as well.

  2. In the bitB Client, navigate to Admin - LDAP Settings

    1. A window will appear for you to enter the IP of your domain controller and the group created or chosen in Step 1. You may add multiple groups that are separated by a semicolon.

      1. Note: Leaving the LDAP Allow Group(s) field blank will allow all users

  • bitB is used as a passthrough to AD.

  • Please note the default role is User. You can then change users to Admin or Network Operator

    • User

      • The standard User role cannot see the Manage section on the Device tab, the Admin tab or Manage Device IPs, or Rediscover Devices in the Device List

    • Admin

      • The Admin has access to all features in bitB.

    • Network Operator

      • The Network Operations role can add/remove (Manage Device IPs) and Rediscover Devices in bitB. The Network Operations role would not see or have access to the Admin tab.

  • No labels